SPT50

The SPT50 is a dust emission controller based on the principle of triboelectricity. It consists of two parts:

- a sensor directly installed on the duct to be monitored. The sensor probe is immersed in the particle-laden air stream. It assesses the dust emission rate in real time.

- a user connection box directly connected to the sensor.

It allows the monitoring and detection of dust emisions.

Downloads

Commercial notices

Technical notices

Configure my need

Control after dust removal unit dry-way

Control after dust removal unit dry-way If no, clarify

Dust kind

Pipe diameter to control point

Flow rate

Flow rate If the flow rate is variable, clarify

Flow maximum temperature

Specify the temperature If the temperature is variable, clarify

Flow humidity

Specify the flow humidity If the flow humidity is variable, clarify

Rejections valuation

Wanted scale

Wanted alarm level

Lead time of the project

Quantity

Advantages

Easy to install and operate

Controls and settings

The SPT50 settings are made from the user connection box, i.e.:
- with an adjustment console with graphic/touch screen
- with a PC computer + dedicated software
Settings adjustments, alert thresholds, alarm, rejection averaging, calibration, etc.
Recording, graphic exploitation, real-time and continuous monitoring of the installation

Characteristics

24 VDC power supply
Sensor body: aluminum IP65, stainless steel probe; fixing by G1/2’’ thread
Junction box: ABS IP65
4 signaling LEDs
2 relay outputs (e.g. alert, alarm)
According to versions :
- 4-20mA active with built-in power supply for reporting rejection values
- Modbus RS485 RTU communication for reports of rejection values and alarm states
Sensor link cable length<>connection box: 10m as standard
Rod length adapted to the diameter of the duct
USB cable suitable for settings